Menu
Your Cart

Scott Safety Pro 2000 PF251/2 Particulate Filter

Scott Safety Pro 2000 PF251/2 Particulate Filter
Scott Safety Pro 2000 PF251/2 Particulate Filter

  • TM3PSL High efficiency particulate filter.
  • For use with Phantom and Tornado powered respirators.
  • Manufactured to EN12941/2.

  • Manufacturer Details
  • Manufacturer SCOTT
  • Manufacturer Code 5052880

Positive Pressure Power System

A power unit designed to provide filtered air for the complete range of Tornado head tops. An intelligent electronic management system ensures battery and filter life are maximised. With 15 power levels, the unit monitors airflow and optimises flow rates. As the filters begin to clog the unit automatically increases power to compensate. Should the battery level become low or the filters clog, an audible and visual warning is given.

Lightweight, worn on a waist belt
Can take up to 3 filters depending on requirements
Battery lock to prevent accidental filter disconnection
Unit is designed to require no routine maintenance and is tamper resistant
Minimum filter requirements: 1 x P3; 2 x A / ABE (But 3 for T&, T8 headtops); 3 x AP / ABEP

Selection Guide
RS Stock No.TypeApplicationsNo. of filters
to be fitted
506-3725P3Solid and liquid particulates
(dusts, fibres, mists, fumes, bacteria and virus)
1
506-3731A2Organic gases and vapours with a boiling point above 65 degrees2; 3 (T7,T8)
506-3747
506-3769
A1B1E1As A2 + inorganic and acid gases and vapours,
e.g. chlorine, hydrogen sulphide, hydrogen cyanide,
sulphur dioxide, hydrogen chloride
2; 3 (T7,T8)
506-3753A2P3As A2 + solid and liquid particulates
(dusts, fibres, mists, fumes, bacteria and virus)
3

Note

Filter adapter 217-1845 required to fit 2 / 3 filters to the power unit.

Standards

EN 12941//2

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Info
Manufacturers Part No. 52880
£15.72
Ex VAT: £13.10
  • Model: W-DMFSFP2512
  • MPN: 52880
This website uses cookies to improve your experience.